This article will show you how to install the carbon fiber spoiler on the Tesla Model Y.

1. Clean the spoiler installation area. (Note: After cleaning, you need to wait for the installation site to dry before installation. At the same time, make sure that the paint on the installation site is intact. If there is any problem with the paint, please repair it first.)

2. After distinguishing the Above and below of the Tesla Model Y carbon fiber rear spoiler, align them on the installation site so that the rear spoiler fits the installation site. The key step after confirming the suitable installation location: affix the positioning sticker.（Note: Be sure to clearly distinguish the top and bottom of the spoiler. Be sure to remove the double-sided tape after the positioning sticker is applied. Do not remove the double-sided tape all at once; instead, remove the tape as you apply it.）

3. Tips for tearing off the protective surface of double-sided tape, First tear it a little bit to align it and then pull it. This trick is to make the rear wing suitable for Tesla model y fit the installation part more closely, so that if there are any problems during the fitting process, adjustments can be made.

4. Press all the way around to make sure the spoiler fits snugly into place.